PCB design services require skilled designers who know how to come up with an optimum physical layout for a printed circuit board. They use cutting-edge CAD tools and other PCB design software that helps them create all kinds of board designs. No matter what sort of board and layout is required to be made, it's always going to be a multi-stage designing process starting with schematic capture.
Designers typically require that clients should provide basic information regarding three key matters. The most important of them is the schematic, but it may alternatively be in the form of a netlist file. This is a file containing connectivity details and component descriptions.
Another thing the client is required to provide is the bill of materials (BOM) specifying each component used and its footprint. Designers are sometimes asked to help with component footprint capture. The client is also expected to provide the board outline. Once they have the schematic or netlist, BOM and the board outline, the designer should be able to do the rest.
Starting from the netlist/schematic, the process is taken further using techniques including library development, signal integrity and EMI checks, stress analysis, thermal simulation, etc. The series of intermediate steps ends with the creation of the gerber file. This format is the preferred one used by the electronics industry to transfer finished PCB images that are ready to be used in the manufacturing stage.
Electrical and electronics circuit designers are expected to be able to work with and create complex designs for digital, analog, RF and mixed PCBs. The boards themselves may be single or double sided or multi-layered. They can be designed to match the customer's needs in different sizes with varying pin densities and component quantities.
The designer also has to decide the board characteristics. This is the method that must be used for mounting components and creating circuit traces. The most popular technique that is now in use is called surface-mount technology.
Under this method, end caps will be soldered on the same side of the board as the component itself. This is a huge improvement over an earlier system that made use of through-hole boards. These older boards required the leads to be inserted from one side and soldered on the traces on the board's other side.
In addition to designing new boards, PCB designers are often called upon to perform other tasks. For instance, one common service is an evaluation of an existing design, its components and the footprint captures. They may also be asked to help out with procuring prototypes, check for availability and price information against the bill of materials.
Certain PCB design services are required even after the client receives the finished product. Customers may seek changes to the design immediately or in future, and reorders are quite common. It works the other way around too, with designers asked to reverse engineer gerber files or film artwork into a netlist format or schematic. This is often required when complex circuits require heavy modifications at the most basic level.
Designers typically require that clients should provide basic information regarding three key matters. The most important of them is the schematic, but it may alternatively be in the form of a netlist file. This is a file containing connectivity details and component descriptions.
Another thing the client is required to provide is the bill of materials (BOM) specifying each component used and its footprint. Designers are sometimes asked to help with component footprint capture. The client is also expected to provide the board outline. Once they have the schematic or netlist, BOM and the board outline, the designer should be able to do the rest.
Starting from the netlist/schematic, the process is taken further using techniques including library development, signal integrity and EMI checks, stress analysis, thermal simulation, etc. The series of intermediate steps ends with the creation of the gerber file. This format is the preferred one used by the electronics industry to transfer finished PCB images that are ready to be used in the manufacturing stage.
Electrical and electronics circuit designers are expected to be able to work with and create complex designs for digital, analog, RF and mixed PCBs. The boards themselves may be single or double sided or multi-layered. They can be designed to match the customer's needs in different sizes with varying pin densities and component quantities.
The designer also has to decide the board characteristics. This is the method that must be used for mounting components and creating circuit traces. The most popular technique that is now in use is called surface-mount technology.
Under this method, end caps will be soldered on the same side of the board as the component itself. This is a huge improvement over an earlier system that made use of through-hole boards. These older boards required the leads to be inserted from one side and soldered on the traces on the board's other side.
In addition to designing new boards, PCB designers are often called upon to perform other tasks. For instance, one common service is an evaluation of an existing design, its components and the footprint captures. They may also be asked to help out with procuring prototypes, check for availability and price information against the bill of materials.
Certain PCB design services are required even after the client receives the finished product. Customers may seek changes to the design immediately or in future, and reorders are quite common. It works the other way around too, with designers asked to reverse engineer gerber files or film artwork into a netlist format or schematic. This is often required when complex circuits require heavy modifications at the most basic level.
About the Author:
If you are looking for reliable PCB design services, pay a visit to our web pages online at www.tritecdesign.com today. You can see details at http://www.tritecdesign.com now.
Posts
No comments:
Post a Comment