Notice that Ethernet cables have different performance based on the construction making them not the same at all. Another great difference is the type of the wire used in constructing the cable. Which will match your needs very well? Read more so that you will be able to know a lot more information on some types of Ethernet cable. You may be able to pick out the best one that fits your system best.
The first type of Ethernet cable is Cat 3. Its work is only limited up to 10 Mbps (megabits per second) since it is an older type. Those different kinds of voice applications like Voice-Over Internet Protocol (VOIP) so not usually use this type outside. This Cat 3 type has an issue of cross-talk and interference which is why it was immediately replaced with more advanced and high quality types.
The second is Cat 5. As expected, it is way better than Cat 3 since it allows you to get 10/100 Mbps of Ethernet connections. When you wrap a cable in a different way from Cat 3 to be fewer twists per foot, then you are reducing its interference. This means Cat 5 has a better performance than Cat 3 one.
Not so long after, there was the creation of Cat 5e cable, an enhanced version of Cat 5. A great choice to support internet connection in both home and business applications since the newer version can let you have up to 10/100/1,000 Mbps Ethernet connections. Because the price point is lower and with a higher end, this type is the most commonly seen type of Ethernet cable available in the market.
Cat 6 is the next type. This type is less popular than Cat 5e; however the two are quite similar. This cable type would basically allow your network to run at almost its full speed as its main benefit. Although it has been made the same way with Cat 5e, the wires are thicker.
The crossover cable is another type and this is the last. Observe first that most Ethernet cables come in standard straight-though design and each end are also identical. You will realize that the inside order of the wires are switched, although crossover cables come in similar design with those standard ones. People usually would be using crossover cable to bypass a router or network hub as well as to connect a certain device to another one directly. However, the crossover is not allowed to be used on behalf of the standard types of Ethernet cables.
After knowing all kinds, which do you think best fits your system?
The first type of Ethernet cable is Cat 3. Its work is only limited up to 10 Mbps (megabits per second) since it is an older type. Those different kinds of voice applications like Voice-Over Internet Protocol (VOIP) so not usually use this type outside. This Cat 3 type has an issue of cross-talk and interference which is why it was immediately replaced with more advanced and high quality types.
The second is Cat 5. As expected, it is way better than Cat 3 since it allows you to get 10/100 Mbps of Ethernet connections. When you wrap a cable in a different way from Cat 3 to be fewer twists per foot, then you are reducing its interference. This means Cat 5 has a better performance than Cat 3 one.
Not so long after, there was the creation of Cat 5e cable, an enhanced version of Cat 5. A great choice to support internet connection in both home and business applications since the newer version can let you have up to 10/100/1,000 Mbps Ethernet connections. Because the price point is lower and with a higher end, this type is the most commonly seen type of Ethernet cable available in the market.
Cat 6 is the next type. This type is less popular than Cat 5e; however the two are quite similar. This cable type would basically allow your network to run at almost its full speed as its main benefit. Although it has been made the same way with Cat 5e, the wires are thicker.
The crossover cable is another type and this is the last. Observe first that most Ethernet cables come in standard straight-though design and each end are also identical. You will realize that the inside order of the wires are switched, although crossover cables come in similar design with those standard ones. People usually would be using crossover cable to bypass a router or network hub as well as to connect a certain device to another one directly. However, the crossover is not allowed to be used on behalf of the standard types of Ethernet cables.
After knowing all kinds, which do you think best fits your system?
About the Author:
Type in 24 patch panel into Bing; do you discover what you need? The next time you put in patch panel, you'll observe that these hyperlinks are what you really required!
Posts
No comments:
Post a Comment